EVERBUILD MP WOOD FILLER is an easy-to-use wood repair solution designed for filling holes, cracks, and imperfections in wooden surfaces. The multi-purpose formula can be applied to both softwood and hardwood surfaces, providing a durable repair that can be sanded down, painted, or stained to match the surrounding woodwork. Available in a range of colors, including Light, Oak, Mahogany, Medium, Pine, and White, it is ideal for use in DIY, professional wood repair, and restoration applications. It’s suitable for interior and exterior use, and can also be used on MDF, particleboard, and plywood.

⭐ Key Features:

• Available in six colors to match most wood finishes (Light, Oak, Mahogany, Medium, Pine, White)

• Fast-drying formula – ideal for quick repairs

• Can be sanded, painted, or stained after application

• Excellent adhesion to wood, MDF, and particleboard

• For interior and exterior applications

• Water-resistant when cured (for outdoor use)

• Non-shrinking formula for smooth repairs

📊 Technical Specifications:

• Type: Ready-to-use wood filler

• Packaging Size: 250ml

• Drying Time: Touch dry in 20 minutes, fully cured in 1-2 hours

• Application Temperature: +5°C to +30°C

• Workable Time: 10-15 minutes

• Color Variants: Light, Oak, Mahogany, Medium, Pine, White

• Finish: Smooth, sandable

• Water Resistance: Water-resistant once fully cured (suitable for outdoor use)

• Shelf Life: 12 months (stored in cool, dry conditions)

🛠️ Ideal For:

• Filling holes, cracks, and gaps in wooden surfaces

• Repairing damaged furniture

• Restoring wooden fixtures, cabinets, and doors

• Outdoor repairs such as garden furniture and fences (when fully cured)

• MDF, plywood, and particleboard repairs

• Smoothing rough areas on new or old wooden surfaces

• Paint, stain, and lacquer prep

🧪 Instructions for Use:

1. Surface Preparation: Ensure the surface is clean, dry, and free from dust and loose material.

2. Application: Using a putty knife or scraper, apply EVERBUILD MP WOOD FILLER into the hole or crack, ensuring it is pushed in thoroughly.

3. Smooth Surface: Smooth over the filler with a wet or damp spatula.

4. Drying: Allow to dry for approximately 1-2 hours, depending on the depth of the fill. For quick touch-ups, it will be touch dry in 20 minutes.

5. Finishing: Once dry, sand to a smooth finish. The filled area can then be painted, stained, or varnished to match the surrounding surface.

6. Clean-up: Clean tools immediately after use with water.