EVERBUILD MITRE FAST KIT STANDARD is a high-performance two-component bonding system designed for rapid fixing of MDF, wood, plastics, rubber, and most common substrates. The kit includes a cyanoacrylate adhesive and a solvent-based aerosol activator that, when used together, form an ultra-fast bond in less than 10 seconds.

Specially developed for mitre joints and profile bonding, this system is ideal for precise woodworking and trade applications requiring instant fixing strength without clamps. Its fast-curing nature makes it invaluable for time-sensitive work on site or in the workshop.

⭐ Key Features:

• Bonds in 10 seconds – ultra-fast curing

• Ideal for mitre joints, trims, cornices, and profiles

• Bonds MDF, wood, plastics, rubber, and metals

• No clamping required

• Easy-to-use aerosol activator

• Suitable for vertical surfaces

• Clean, clear adhesive finish

• Available in standard kit: 200ml activator + 50g adhesive

📊 Technical Specifications:

• Adhesive Type: Cyanoacrylate (superglue)

• Activator Type: Solvent-based aerosol

• Adhesive Size: 50g bottle

• Activator Size: 200ml can

• Colour: Clear (adhesive), transparent spray (activator)

• Viscosity: Low – for quick absorption and thin bonding layers

• Bond Time: 5–10 seconds (depending on material & conditions)

• Service Temperature: -50°C to +80°C

• Full Cure Time: 24 hours (bond usable in seconds)

• Shelf Life: 12 months unopened

🛠️ Ideal For:

• Mitre joints on skirting boards, architraves, trims

• Fixing cornices, wooden mouldings, and edge profiles

• Shopfitting and exhibition stands

• Signage and plastic assembly

• Fast wood and MDF bonding in joinery

🧪 Instructions for Use:

1. Surface Prep: Ensure surfaces are clean, dry, and free of dust and grease.

2. Application:

   • Apply a small amount of adhesive to one surface.

   • Spray activator on the other surface.

3. Bonding: Bring surfaces together immediately and hold for 10–15 seconds.

4. Cure Time: Functional strength in seconds; full cure in 24 hours.

5. Clean-Up: Use acetone or a suitable solvent for uncured adhesive. Cured product must be removed mechanically.

⚠️ Note: Do not overapply activator – a light mist is sufficient.